Best 5 Channel Car Amplifiers | TopReviews

Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.

Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 120 Watts x 4 + 500 Watts x 1 <1% THD+N. 4 Ohm: 80 Watts x 4 + 300 Watts x 1 <1% THD+N.

RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song. 2 Ohm 480 Watts x 4 + 2000 Watts x 1. 4 Ohm: 320 Watts x 4 + 1200 Watts x 1.

High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: (CH1-CH4)40Hz –4KHz /(CH5)50Hz –250Hz. High Pass Filter: 15Hz – 4KHz. Subsonic Filter: 15Hz - 55Hz.

Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control. Fully Adjustable 12dB Bass Equalizer. Mute and Delay Soft Start System. 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power: < 0.05%. S / N Ratio: >90dB. Frequency Response: 15-35KHz. Damping Factor: >100@ 100Hz. 40 Amp x3. Dimensions: (W x H x L) 9'' x 2.4' x 18.6".

Power - 3000 Watts Max x 1 @1-Ohm, 1500 Watts Max x 1 @2-Ohms

Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

Strapping Capable - You are able to strap TWO PL3000.1D amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the extra power

Variable Subsonic Filter - To prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion

Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Variable Bass Boost - Bass Boost allows you to adjust the low bass within the boost range to just the way you like it

Specs - Dimensions: 11.9” x 7” x 2.3”, Weight 6.7 lbs.

Warranty - Planet Audio provides a powerful 6 year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.Com. We strongly encourage professional installation of this product to ensure proper and safe functionality

2000 W MAX Power @ 2 Ohm x 1 Channel

1000 W MAX Power @ 4 Ohm x 1 Channel

High and Low Level Inputs

Variable Low Pass Crossover, Variable Bass Boost

Remote Subwoofer Control

Blue Backlit Illumination

Dimensions: Depth 12.8” x Width 7” x Height 2.4”

6 Year Platinum Online Dealer Warranty valid only on products Sold / Shipped by Amazon.com. This offer is not valid on purchases made from third party market place sellers

Power - 550 Watts Max x 4 @2-Ohms, 275 Watts Max x 4 @4-Ohms, 1100 Watts Max x 2 Bridged @4 Ohms

Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its outputs with no audio signal

Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers

MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss & eliminating all secondary feedback circuitry

Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier

Low/High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers

Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)

Bridgeable - Dramatically increase the power output to you speakers and subwoofers by connecting two amplifier channels

Dimensions - 17” x 10.31” x 2.25” - 4.9 lbs.

Warranty - BOSS Audio Systems provides a powerful 6-year Platinum Online Dealer Warranty so long as the purchase is made through Amazon.com. We strongly encourage professional installation of this product to ensure proper and safe functionality

The Punch P500X1bd is a full chassis (2.38” x 7.76” x 11.03”) mono amplifier optimized for subwoofers only, capable of 500 Watts into a 1-Ohm load

Class-BD technology produces bass more efficiently over traditional amps (RMS Power Output: 150 Watts x 1 @ 4-Ohm OR 300 Watts x 1 @ 2-Ohm OR 500 Watts x 1 @ 1-Ohm)

RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter

Featuring RCA pass-thru outputs, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up

Famous Rockford Fosgate build quality with a full 1-year warranty when purchased from an authorized Rockford Fosgate reseller

Operating Voltage: 9 - 16 VDC

Our compact (1.5" x 4.25" x 6.75") PBR400X4D is small enough to fit in just about any application but packs a Punch with 400 Watts RMS of power!

Versatile design can be used in either 2 or 4 channel configurations (RMS Power Output: 50 Watts x 4 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm or 200 Watts x 2 @ 4-Ohm Bridged)

Ultra efficient Class D full range design produces maximum power with minimal strain on the vehicle's electrical system. A great choice for both mobile installs as well as motorcycles and recreational vehicles

High level inputs with auto-on feature as well as differential RCA inputs along with selectable fixed 12dbB/Octave Butterworth Crossovers make the PBR400X4D amp compatible with just about any installation

Famous Rockford Fosgate build quality insures that the PBR400X4D will handle everything you throw at it! Full 1-year parts and labor warranty when purchased from an authorized Rockford Fosgate reseller

Power: 2500 watts max X 1 @1-ohm, 1250 watts max X 1 @2-ohms, 625 watts max X 1 @4-Ohms

Class D: power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry

1 ohm stable: able to continuously power loads of 1 ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be able to perform the way they were made to

Variable subsonic filter: to prevent your subwoofer(s) from bottoming out, the variable subsonic filter filters out frequencies below the subwoofer(s) specified low frequency limits and allows the driver to reach a maximum safe excursion

Variable low-pass crossover: subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction

Variable bass boost: bass boost allows you to adjust the low bass within the boost Range to just the way you like it

Specs: the BBD2500 is 11.4 inches in depth, 6.9 inches in width and 2.7 inches in height. It weighs 5.8 lbs.

Warranty: Planet Audio systems provides a powerful 3-year Platinum online dealer warranty so long as the purchase is made through Amazon.Com. We strongly encourage Professional installation of this product to ensure proper and safe functionality

Get clear, powerful sounds in your vehicle with the Kicker 1200 W Mono Amplifier

RMS Power:

600 Watt x 1 channel @ 4 Ohm

1200 Watt x 1 channel @ 2 Ohm

Show your friends you can do 70 mph down the highway with the windows down and still have crisp and clean sound over the wind noise with this car speaker amplifier

Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application; but don’t let the size fool you, this 4ch car amp produces amazing sound quality

MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists

4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier

Car stereo amplifier with 110 watts RMS at 2-ohm load x 4-channels (14.4v); 80 watts RMS power at 4-ohm load x 4-channels (14.4v); 160 watts RMS at 4-ohm bridged x 2-channels (14.4v)

Super-efficient class D design—runs much cooler than conventional amps

High-speed MOSFET switching—Power supply with outputs stable into 1 ohm loads

Protection—Thermal, DC offset, reverse polarity and short circuit protection

Nickel-plated wire terminals & RCA connectors—Ensure maximum signal transfer

Level control—adjusts the gain of the channel to match the output voltage from your head unit